© 2019 Avaya Inc. All rights reserved.
© 2015 Avaya Inc. All rights reserved. NDA Confidential, Use pursuant to your agreement.
Once they are added, Pre-provisioned endpoints are marked with a blue "clock" icon in the
Avaya Equinox® Management list. This icon means that a profile is ready to be applied to an
endpoint with a certain Service Code, but the endpoint did not yet connect to receive the
provisioning profile.
Pre-provisioned Endpoints Listed
When the pre-provisioned Endpoint starts for the first time, you will be invited by a guided
procedure to choose the preferred language and then to enter your Service Code
Insert the service code in the Quick Setup Wizard
Pre-configuration Found
If the service code is correct, the pre-provisioned name for your endpoint is shown and you
can continue the automatic configuration. If the service code is not correct or you do not
accept the pre-configuration, you can go back to previous step and proceed with a manual
configuration.
Important
• Once your endpoint has been successfully provisioned, the Avaya Equinox®
Management mode will be marked as “Cloud”
• When managed in “Cloud mode”, the endpoint is connected using a secure web
socket to Avaya Equinox® Management for services like configuration, LDAP
entries, software upgrade, scheduling and meeting management (meeting
roster and similar features).
To Next Page
Loading...
