© 2019 Avaya Inc. All rights reserved
Release Notes for Avaya IX Collaboration Unit CU360 Known Issues 21
Very rarely, the audio Bluetooth
connection could be closed
unexpectedly.
Pair the Bluetooth device again.
When you connect a touch
screen display to your Avaya
CU360, please assure that a
standard multitouch touch
screen monitor supporting
Android 7 via USB is used.
Check that both USB and HDMI are connected to
the Codec Unit and to the touch screen monitor.
Check that the touch screen supports standard
multitouch interface on USB without requiring
installation of drivers for Android or Linux.
It is not possible to downgrade
to a previous release
You need to reimage the system from scratch.
NetLog does not work first time
after upgrading to this release
Restart the device at least once after upgrading
from 10.0 to 10.1 before using NetLog.
To Next Page
Loading...
