3. Click Utilities > Remote Access > Download.
4. Configure the following fields:
• Download Management
• Enable All Addresses
• Address
• Subnet Mask
• Password Protect
• Password
• Verify Signature
• OTA Update Enable
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Download field descriptions
Name
Description
Download Management The option to enable or disable remote upgrade to Avaya IX
™
CU360.
Enable All Addresses The option to allow remote upgrade of Avaya IX
™
CU360 using all IP
addresses or restrict remote upgrade to a specific range of IP addresses.
The options are:
• Yes: Enables remote upgrade from any IP address.
• No: Restricts remote upgrade to a specific range of IP addresses. You
can define the range of IP addresses in Address and Subnet Mask.
Address The IP addresses of the devices that you allow to make the upgrade.
You can enter a value in this field only if you configure Enable All
Addresses to No.
Subnet Mask The range of addresses that you allow to make the upgrade.
You can enter a value in this field only if you configure Enable All
Addresses to No.
Password Protect The option to configure Avaya IX
™
CU360 to add password protection.
Password The password for remote upgrade.
Verify Signature The option to enable or disable the signature verification.
Table continues…
Download field descriptions
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 109
Comments on this document? infodev@avaya.com
To Next Page
Loading...
