Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click System > Location.
4. Configure the following settings:
• System Name
• System Name Unicode: This option is available only on the web interface.
• System Name Display Mode
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
System name field descriptions
Name
Description
System Name The name of the Avaya IX
™
CU360 endpoint.
This field displays the initial name you entered during the quick setup
wizard.
System Name Unicode The name of the Avaya IX
™
CU360 endpoint with non-alphanumeric
characters.
For example, Chinese or Japanese letters.
Table continues…
System name field descriptions
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 59
Comments on this document? infodev@avaya.com
To Next Page
Loading...
