Avaya IX Collaboration Unit CU360 - Configuring Monitor Settings

To Next Page

To Previous Page

2. On the endpoint, click Advanced.

The default PIN for Advanced settings on the endpoint is 1234.

If your administrator configured a PIN to gain access to the advanced settings on the

endpoint, Avaya IX

™

CU360 prompts you to enter the PIN. After you enter the PIN, Avaya

™

CU360 displays the Advanced window.

3. Click I/O Connections > Cameras > USB.

4. Select Yes for Enable the camera.

5. On the web interface, click Save.

Related links

Enabling the Avaya IX CU360 advanced settings on page 37

Configuring the monitor settings in Avaya IX

™

CU360

About this task

After you connect the monitor to the HDMI port on Avaya IX

™

CU360, you can configure it.

This configuration is available only if your administrator enables the advanced settings for users.

Procedure

1. Do one of the following:

• On the endpoint main menu, click Configure.

• On the web interface, click Administrator Settings.

2. On the endpoint, click Advanced.

The default PIN for Advanced settings on the endpoint is 1234.

If your administrator configured a PIN to gain access to the advanced settings on the

endpoint, Avaya IX

™

CU360 prompts you to enter the PIN. After you enter the PIN, Avaya

™

CU360 displays the Advanced window.

3. Click I/O Connections > Monitors > General.

4. Configure the following fields:

• Number of Monitors

• Resolution HD1

• CEC – Select as Source on Incoming Calls

5. On the web interface, click Save.

Other manuals for Avaya IX Collaboration Unit CU360