Avaya J100 - Page 130

Parameter name Default value Description
MAX_TRUSTCERTS 6 Specifies the maximum number
of trusted certificates defined by
the TRUSTCERTS parameter
which can be downloaded to the
phone.
Valid values are from 1 to 10.
Note:
Each trusted certificate file
may contain more than one
certificate.
EXCHANGE_SERVER_LIST Null Specifies a list of one or more
Exchange server IP addresses.
The value can contain up to 255
characters.
Addresses can be in dotted-
decimal or DNS name format,
separated by commas without
any intervening spaces.
EXCHANGE_SERVER_SECURE
_MODE
1 Specifies whether to use HTTPS
to contact Exchange servers.
Value Operation:
• 0: HTTP is used.
• 1: HTTPS is used.
EXCHANGE_EMAIL_DOMAIN Null Specifies the Exchange email
domain.
The value can contain from 0 to
255 characters.
EXCHANGE_USER_DOMAIN Null Specifies the Exchange email
user domain.
The value can contain from 0 to
255 characters.
EXCHANGE_AUTH_USERNAME
_FORMAT
0 Specifies the format of the
username for user authentication.
Value Operation:
• 0: Office 2003 / Office2016
username format, for example:
EXCHANGE_USER_DOMAIN
\Exchange Username.
• 1: Office 365 username format,
for example: Exchange
Table continues…
Configuring servers and VLAN
December 2018 Installing and Administering Avaya J100 Series IP Phones 130
Comments on this document? infodev@avaya.com