Avaya J100 - Chapter 6: Avaya Aura Configuration for Phones; SIP Phone Administration on Communication Manager

Chapter 6: Avaya Aura configuration for
phones
SIP phone administration on Communication Manager
The SIP-based calling features in the following table can be invoked directly on Avaya J100 Series
IP Phones or using a feature button provisioned using Avaya Aura
®
Communication Manager.
Communication Manager automatically processes other calling features such as call coverage,
trunk selection using Automatic Alternate Routing (AAR), or Automatic Route Selection (ARS),
Class Of Service/Class Of Restriction (COS/COR), and voice messaging.
Note:
• For more information, see Avaya Aura
®
Communication Manager Feature Description
and Implementation and other Communication Manager administration documents at the
Avaya Support website:
http://support.avaya.com/
• For information about IP Office, see Avaya IP Office
™
Platform SIP Telephone
Installation Notes.
The Avaya SIP solution configures all SIP phones in Communication Manager as off-PBX station
(OPS).
Feature
Survivable operation with third-
party proxy
Normal operation with
Communication Manager and
Session Manager
3-Way Conferencing Yes No
Conference using conference
server
— Yes
Automatic Call Back/Cancel — Yes
Call Forward All Calls – on/off Yes Yes
Call Hold Yes Yes
Call Park and Unpark — Yes
Calling Party Number Block — Yes
EC500 — Yes
Malicious Call Trace — Yes
Message Waiting Indication MWI is not available. If the
PSTN_VM_NUM parameter is
Yes
Table continues…
December 2018 Installing and Administering Avaya J100 Series IP Phones 132
Comments on this document? infodev@avaya.com