Restarting the phone
Procedure
1. Press Main Menu > Admin.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Restart phone.
5. Press Restart when the phone prompts for confirmation.
A restart does not affect user-specified data and settings, such as contact data or the
phone login and password.
Configuring SIP settings
About this task
Use this procedure to set up SIP-related settings, such as identifying the SIP proxy server.
Note:
In IP Office the autogenerated J100 settings.txt includes the settings for the SIP servers
and protocols. The settings are based on the SIP values set in the IP Office system
configuration.
Procedure
1. Press Main Menu > Admin.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select SIP.
5. Choose one of the following:
• SIP global settings
• SIP proxy server
6. Press Select or OK to change any of the following SIP global settings:
• Domain: Changes the domain parameter of SIP.
• Avaya Environment: Specifies whether the available SIP Avaya environment is in
effect.
The two modes to detect the available environment are as follows:
- Auto: Detects the Avaya environment automatically.
Restarting the phone
December 2018 Installing and Administering Avaya J100 Series IP Phones 153
Comments on this document? infodev@avaya.com
To Next Page
Loading...
