Avaya J100 - Call Pickup Configuration; Call Park; Auto Intercom Group Code; Team Button

Call pickup configuration
This feature must be activated on the Avaya Aura
®
Communication Manager.
Use the 46xxsettings file to set the following parameters:
Parameter name Default Value Description
CALL_PICKUP_INDICATION 3 Specifies the following call pickup
indication types:
• Audio
• Visual
• None
Call Park
The Call Park feature is used to put an active call on hold at a parking extension and to retrieve
the same parked call from another phone in the organization.
You can activate this feature on Avaya Aura
®
Communication Manager.
Auto Intercom group code
If the Auto Intercom grp code is activated by the system administrator, the end user can call a
specific intercom group. Dial Intercom feature can allow one user to call another user in a group
by using a predefined extension.
This feature must be activated on the Avaya Aura
®
Communication Manager.
Team Button
The Team Button feature is used to:
• Monitor the status of the extensions of other team members.
• View the call redirection of the monitored phones.
• Answer any incoming call to the monitored station.
• Speed dial to call a monitored station that is idle.
• Override the call redirection feature that includes SAC, CFWD, or ECF to ensure that a call
rings on the monitored phone.
Feature configuration
December 2018 Installing and Administering Avaya J100 Series IP Phones 170
Comments on this document? infodev@avaya.com