Avaya J100 - Redundancy in a Non-Avaya Proxy Environment

Parameter name Default value Description
numbers with more flexibility when used together
with the LOCAL_DIAL_AREA_CODE parameter .
LOCAL_DIAL_AREA_CODE Specifies whether a user must dial the area code
for calls within the same area code regions.
Value operation:
• 0: Users do not need to dial an area code.
• 1: Users need to dial an area code.
DIALPLAN Null Specifies the dial plan used in the phone. It
accelerates dialing by eliminating the need to wait
for the INTER_DIGIT_TIMEOUT timer to expire.
Redundancy in a non-Avaya proxy environment
In an Avaya environment, the SIP proxy list is defined using dotted decimal notation to define the
proxy addresses. In a non-Avaya environment, where FQDNs are used to define the SIP proxy,
there can only be one proxy. In this case, redundancy is not supported.
Redundancy in a non-Avaya proxy environment
December 2018 Installing and Administering Avaya J100 Series IP Phones 187
Comments on this document? infodev@avaya.com