Avaya J100 - Page 45

Name Description
The options are:
• No
• Limited Port Unreachable messages (default)
• Protocol and Port Unreachable messages
Redirect Message Control Specifies whether the ICMP redirect messages are
processed or not.
The options are:
• Yes
• No (default)
TCP
Send TCP Keep Alive Message Specifies whether the TCP/IP keep-alive messages
are enabled or disabled in the system.
The options are:
• Enable (default)
• Disable
TCP Keep Alive Time Specifies the wait time interval in seconds of the
phone before sending out the TCP keep-alive
message (TCP ACK message) to the far-end.
Valid value is an integer from 10 to 3600. The
default option is 60 seconds.
TCP Keep Alive Interval Specifies the TCP keep-alive packet re-
transmission interval.
Valid value is an integer from 5 to 60. The default
option is 10 seconds.
TLS
Use TLS Version Specifies the TLS versions used in the network.
The options are:
• 1.0 and 1.2 (default)
• Only 1.2
Web Server
Web Server On HTTP Specifies whether HTTP access to the web
interface is enabled or disabled.
The options are:
• Yes (default)
• No
Table continues…
Configuring network settings
December 2018 Installing and Administering Avaya J100 Series IP Phones 45
Comments on this document? infodev@avaya.com