Certificates field descriptions
Name Description
Certificates
Available Trusted Certificate Displays the file names of available certificates for authentication.
Upload Trusted Certificate Specifies the trusted certificate used by the phone. You can also
browse and upload the certificates from the local PC by clicking
Browse > Import.
Trusted Certificates file to upload Specifies the name of the certificate file to be uploaded.
The valid value is a string os up to 255 ASCII characters. File
names must be separated by commas without any intervening
spaces.
The default value is empty.
Match Identity to trust certificate Specifies the status of the TLS server identification.
The options are:
• Yes (default)
• No
Server Certificate re-check hours Specifies the time interval in hours for rechecking the expiration
and revocation status of the certificates used to establish any
existing TLS connections.
The valid value is an integer from 0 to 32767. The default value is
24 hours.
Warning on number of days
before Certificate expiration
Specifies the number of days before the expiration of a certificate
that a warning must first appear on the phone screen.
The valid value is an integer from 0 to 99. The default value is 60
days.
FQDN IP Mapping Specifies a FQDN contained in the certificate when an IP address
is used to establish the connection. The parameter is a comma-
separated list of names or value pairs where the name is an FQDN
and the value is an IP address.
The valid value is a string of up to 255 characters without any
intervening spaces. The default value is empty.
Online Certificate Status Protocol (OCSP)
Enable OCSP Specifies the status of OSCP.
The options are:
• Disable (default)
• Enable
Table continues…
Configuring certificates
December 2018 Installing and Administering Avaya J100 Series IP Phones 89
Comments on this document? infodev@avaya.com
To Next Page
Loading...
