Avaya J100 - Dtmf; Emergency Call

17
1.2.8 DTMF
Configure J100 Settings file
Step
Command
Step 1
SET SEND_DTMF_TYPE 1 (1:in-band, 2: out of band)
Configure DTMF in-band or out of band (RFC 4733 replaced for RFC 2833) in Asterisk server
Step 1: Go to Applications > Extensions > Edit <extension> > Advanced
Note: DTMF in-band only works with codec G.711A and G.711U
1.2.9 Emergency call
Configure J100 Settings file
Step
Command
Step 1
SET PHNEMERGNUM 999
Step 2
SET ENABLE_SHOW_EMERG_SK 2
Step 3
SET ENABLE_SHOW_EMERG_SK_UNREG 2