No. Name Description
1 Line buttons with
integrated LEDs
Line buttons used for receiving calls, making outgoing calls, and
answering them for other extensions or accessing features.
The LEDs integrated in the line buttons are synchronized with the
LEDs on the phone. Turning off the backlight of the phone turns off
the line button LEDs on the expansion module.
Line button LEDs indicate the following:
• The green light indicates an incoming call or an enabled feature.
• The red light indicates that the line is in use or the feature has
been disabled.
2, 4 Left and Right page
buttons
Buttons used to switch to a different active page.
3 Active page LEDs Three LEDs indicating which active page is displayed.
Note:
The indication will change if only one Avaya J100 Expansion
Module if attached. If more expansion modules are attached,
the first LED is lit permanently.
Avaya J100 Expansion Module icons
Avaya J100 Expansion Module uses the icons of the phone model it is attached to.
Note:
The icons of Avaya J100 Expansion Module attached to Avaya J169 IP Phone are grayscaled.
For more information about Avaya J100 Expansion Module icons, see the related section in the
user guide of your phone model.
Avaya J100 Expansion Module upgrade indication
Avaya J100 Expansion Module firmware upgrade process is indicated by displaying the Upgrade
notification on the expansion module.
Once the updated firmware has been downloaded, Avaya J100 Expansion Module displays
the following notification: This device will be out of service for 3 minutes to
apply the update.
Press the corresponding line button for Apply now or Apply tonight option to select the suitable
upgrade time.
Note:
When the Upgrade notification is displayed, the expansion module screen saver is disabled
and the backlight is not turned off.
Avaya J100 Expansion Module overview
January 2024 Using Avaya J100 Expansion Module for SIP 11
Comments on this document? infodev@avaya.com
To Next Page
Loading...
