4. Scroll to Screen saver, and press Select.
5. Select Module Display.
You can set a screen saver for Avaya J100 Expansion Module. You can use either the
built-in images or the custom image from the image list.
6. Scroll to the new image.
7. (Optional) To preview the image, press Preview, and then press Back.
8. Press Select.
9. Press Save.
Adjusting the expansion module brightness
Procedure
1. On the phone, press Main Menu.
2. Scroll to Settings and press Select.
3. Scroll to Display and press Select.
4. Scroll to Brightness, and press Select.
5. Scroll to Module.
6. (Optional) If there are more than one Avaya J100 Expansion Module attached, select the
module by the module number.
7. Press one of the following:
• Right arrow key: To increase the brightness.
• Left arrow key: To decrease the brightness.
Setting the text size
Procedure
1. Press Main Menu.
2. Scroll to Settings and press Select.
3. Scroll to Display and press Select.
4. Scroll down to Text size and press Select.
5. Scroll down to Primary display and press Select.
6. Press one of the following:
• Right arrow key: To increase the font size.
• Left arrow key: To decrease the font size.
7. (Optional) To restore the default font size, press Default.
8. Press Save.
Customizing the display
January 2024 Using Avaya J100 Expansion Module for SIP 19
Comments on this document? infodev@avaya.com
To Next Page
Loading...
