Chapter 1: Introduction
Purpose
This document is intended for end users and provides an overview of the features available on
Avaya J100 Expansion Module for SIP firmware. It also describes procedures to set up Avaya
J100 Expansion Module functionalities.
Change history
Issue Date Summary of changes
Release 4.0.14,
Issue 1
October 2022 Updated "Settings" chapter.
Release 4.1.2,
Issue 1
October 2023 Added "Display Mode"
January 2024 Using Avaya J100 Expansion Module for SIP 7
Comments on this document? infodev@avaya.com
To Next Page
Loading...
