Avaya J100 - Reporting System Alarms

• Start Up (IP500 V2/Server Edition) – This option is available when an Inactive card is
present. It allows the card to be made active again.
• System Backup (IP500 V2/Server Edition) – This option is available when a System
card is present and active. It allows the telephone system's current configuration
settings to be copied to a backup file on the memory card.
• System Restore (IP500 V2/Server Edition) – This option is available when a System
card is present and active. It overwrites the telephone system's current configuration
settings with those from a backup file on the card.
• Upgrade Config (IP500 V2) – Copy configuration files from an Option card to the
System card in the system control unit.
• Upgrade Binaries (IP500 V2) – Copy software files from an Option card to the System
card in the system control unit.
• Copy (IP500 V2) – This option is available on systems where both a System and
Option memory card are active. It copies the contents of the System card to the Option
card.
Related links
System Administration on page 169
Reporting System Alarms
An S in the phone status letters indicates a system alarm. This happens if you are configured as a
system phone user.
Details of the alarm may also appear in your phone's Status menu. This allows you to report the
problem to your system administrator or maintainer. Note that the alarms vary depending on the
type of system.
Procedure
1.
Press the
button.
2. Scroll to the alarm message text:
• If displayed, press Admin to see additional information.
• If displayed, press Clear to clear the alarm.
Related links
System Administration on page 169
Reporting System Alarms
April 2020 J100 Series Phone User Guide 175
Comments on this document? infodev@avaya.com