• The soft keys at the bottom of the display automatically change to reflect actions that
can be performed on the call, if any, associated with the currently highlighted button.
Related links
Conferencing on page 78
Conference Short Codes
Short codes are numbers that you can dial to enable and disable various features. The following
are default short codes that may be available. However, your system administrator can remove
and change the short codes available to you or all users. To use a short code, you may have to
put your currently call on hold.
These are useful as they can be dialed from any phone on the system. For example, this allows
you to login at a basic analog extension and still control a number of features.
Some short codes require you to enter some information when you dial them, typically an
extension number. That is indicated by N in the short codes shown below.
Conference
• Conference Held Calls: *47 – Start a conference between yourself and any calls that you
have on hold.
Related links
Conferencing on page 78
Conferencing
April 2020 J100 Series Phone User Guide 84
Comments on this document? infodev@avaya.com
To Next Page
Loading...
