Avaya J129 - Wi-Fi Settings Field Descriptions

Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Wi-Fi.
3. Configure the following areas:
• WiFi Control
• WiFi Setting
• IP Configuration
• WEP
• WPA2 Enterprise (802.1x)
• QoS
4. Click one of the following:
• Save: To save the configuration changes.
• Reset to Default: To revert to the default values.
Related links
Configuring the phone using the web interface on page 92
Wi-Fi settings field descriptions on page 104
Wi-Fi settings field descriptions
Name
Description
WiFi Control
WLAN Network Configuration Mode Specifies the Wi-Fi network configuration mode.
The options are:
• Automatic (default)
• Manual
WiFi Setting
Country Specifies the country code to define the Wi-Fi radio parameters
permitted by the local regulatory domain.
Value format: two-character country code. The default value is
US.
Use of 802.11d Configures the 802.11d specifications automatically to the local
regulatory domain for the WLAN network.
The options are:
• Disable (default)
• Enable
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 104
Comments on this document? infodev@avaya.com