Name Description
Remote Data Source initial
retry attempts
Specifies the number of attempts the PPM adaptor must try to download
from PPM before it stops connecting to the PPM server.
The valid value is an integer from 1 to 30.
The default value is 15 attempts.
Local Port
RTP Port (minimum) Specifies the lower limit of a port range.
• RTP
• RTCP
• SRTP
• SRTCP
The valid value is an integer from 1024 to 65,503.
The default value is 5004.
RTP Port (range) Specifies the port range to be used by the following connections:
• RTP
• RTCP
• SRTP
• SRTCP
The valid value is an integer from 32 to 64,511.
The default value is 40.
SIP Signaling Port
(minimum)
Specifies the lower limit of a port range to be used for SIP signaling.
The valid value is an integer from 5062 to 65,503.
The default value is 5062.
SIP Signaling Port (range) Specifies the port range to be used for SIP signaling.
The valid value is an integer from 32 to 60,473.
The default value is 60473.
Miscellaneous
Conference Factory URI Specifies the URI for Avaya Aura
®
Conferencing or network conferencing in
Open SIP environments.
The valid value is a string of up to 255 ASCII characters.
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 116
Comments on this document? infodev@avaya.com
To Next Page
Loading...
