Name Description
Subscribe Event Packages Specifies a comma-separated list of event packages to subscribe to after
registration.
Allowed values are:
•
reg
•
dialog
•
mwi
•
ccs
• message-summary, which is identical to mwi
• avaya-ccs-profile, which is identical to ccs
For IP Office, you must use the following:
•
reg
• message-summary, which is identical to mwi
• avaya-ccs-profile, which is identical to ccs
For the third-part call control setup, you can use message-summary.
Voice Mail Access Code Specifies the number to access the voice mail in a non-Avaya environment.
100rel Specifies whether the 100rel option tag is included in the SIP INVITE
header field.
The options are:
• Disable: The tag is not included.
• Enable (default): The tag is included.
Validate Incoming
messages
Specifies whether AOR received in Request-URI of an incoming call must
be validated with the contact header published by phone during
registration.
The options are:
• Disable (default)
• Enable
‘Privacy’ header in
Incoming message
Specifies whether AOR received in Request-URI of an incoming call must
be private in the contact header published by the phone during registration.
The options are:
• Display CallerID information (default)
• Display ‘Restricted’
Related links
Configuring SIP settings on page 109
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 117
Comments on this document? infodev@avaya.com
To Next Page
Loading...
