Avaya J129 - Logging In on Another User’s Phone

Name Description
DND Priority over Call Forward
(Unconditional, Busy)
Specifies the priority between the Do Not Disturb and Call
Forward (Unconditional/Busy) features when both are activated
by the user.
The options are:
• Yes
• No (default)
Auto Answer Specifies the status of the Auto Answer feature.
The options are:
• Do Not Allow (default)
• Allow
Mute on Auto Answer Specifies muting when the Auto Answer feature is enabled.
The options are:
• Yes (default)
• No
Hold Reminder Timer Specifies the time in seconds after which the phone plays the
hold reminder tone.
The valid value is an integer from 0 to 999. The default value is
0 seconds.
Transfer on Conference hangup Specifies whether a conference call continues after the host
hangs up.
The options are:
• Yes
• No (default)
Presence Specifies the status of the Presence feature.
The options are:
• Do Not Allow
• Allow (default)
Shortcut action Contact Specifies the shortcut action performed by activating the
Contact line during an active call.
The options are:
• Call to Contact destination (default)
• Transfer to Contact destination
• Blind transfer to Contact destination
• Conference to Contact destination
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 120
Comments on this document? infodev@avaya.com