Avaya J129 - Page 130

Name Description
Show Last Extension Specifies whether the extension is displayed after logging out.
The options are:
• Disable (default)
• Enable
Bluetooth
Bluetooth Enable Specifies whether Bluetooth can be enabled in the phone menu.
The options are:
• Disable
• Enable (default)
CCMS
Media Preservation Specifies whether a call will be preserved when there is no SIP
connectivity to IP Office.
This setting is applied only in the Avaya Aura
®
environment.
The options are:
• Disable
• Enable (default)
Preserved Call Duration Specifies the time interval in minutes during which the call is
preserved. To apply this setting, Enable IP Office should be set
to CCMS and Media Preservation should be enabled.
Note:
This setting is applied only in the Avaya Aura
®
environment.
The valid value is an integer from 10 to 120. The default value
is 120 minutes.
Brightness
Display Brightness Adjusts the brightness of the phone display.
The options are from 1 to 5. The default value is 4.
Button Module #1 Display Brightness Adjusts the display brightness of the first attached button
module.
Note:
If no button modules are attached to the phone, this field is
disabled.
The options are from 1 to 5. The default value is 4.
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 130
Comments on this document? infodev@avaya.com