Avaya J129 - Configuration; Download Configuration File Using HTTPS Only; Firmware; Plug-And-Play (PNP) Provisioning

Name Description
HTTPS Port Specifies the HTTPS port address.
The valid value is an integer from 0 to 65535. The
default value is 443.
Plug-and-Play (PNP) Provisioning
PNP Configuration Specifies the status of the PNP configuration.
The options are:
• Enabled (default)
• Disabled
Configuration
Configuration Server Access Mode Specifies the server access mode of the
provisioning server.
The options are:
• HTTP
• HTTPS (default)
Note:
Use HTTPS if the SIP transport mode is TLS,
otherwise, use HTTP.
Download configuration file using HTTPS only Specifies whether only HTTPS is used to download
the settings file.
The options are:
• Yes
• No (default)
Import Configuration File Enables the user to import the settings file.
To import the settings file, click Browse to browse
your local PC or any PC connected to the network.
Select the file and click Import.
Restart the phone for new parameters from the
settings file to take effect.
Export Configuration File Enables the user to export a configuration file.
To export the configuration file, click Export.
Firmware
Software Version Displays the version of the SIP software.
This field is empty by default.
Backup Software Version Displays the backup software version.
This field is empty by default.
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 135
Comments on this document? infodev@avaya.com