Avaya J129 - Debugging

3. In the Web Admin Password section, do the following:
a. Enter your current password in the Current Password field.
b. Enter your new password in the New Password field.
c. Re-enter your new password in the Confirm Password field.
d. Click Save.
4. In the Phone Administration Menu Password section, do the following:
a. Enter your web administrator password in the Web Administrator Password field.
b. Enter your new password in the New Password field.
c. Re-enter your new password in the Confirm Password field.
d. Click Save.
Related links
Configuring the phone using the web interface on page 92
Debugging
About this task
Avaya J100 Series IP Phones display the details of the configuration fields in the Description
section of the screen.
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Debugging.
3. Configure the fields in the following areas:
• Log
• SNMP
• RTCP Monitoring
• Phone Report
• SSH
• SLA Monitor
• Other
4. Click one of the following:
• Save: To save the configuration changes.
• Reset to Default: To revert to the default values.
Related links
Configuring the phone using the web interface on page 92
Debugging field descriptions on page 138
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 137
Comments on this document? infodev@avaya.com