• BM 1 (Button module 1)– 25 to 48 Phone keys.
• BM 2 (Button module 2)– 49 to 72 Phone keys.
• BM 3 (Button module 3)– 73 to 96 Phone keys.
Procedure
1. Log in to the web interface.
2. In the navigation pane, click Key Configuration.
3. In the Key Configuration tab, click on the required tab.
• Keys
• BM 1
• BM 2
• BM 3
4. For any key of the selected tab, enter the required value in the following fields:
• Type
• Name
• Attribute 1
• Attribute 2
• Label
• Delete
5. Click one of the following:
• Save: To save the changes.
• Restore customization: To clear all the customized keys, and revert to the
administrator set values.
You cannot modify or delete a forced pre-configured key, that is configured from the
46xxsettings.txt file.
Related links
Configuring the phone using the web interface on page 92
Pre-configuration fields on page 149
Pre-configuration fields
In the key configuration tab, the following fields are available for the phone and button module.
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 149
Comments on this document? infodev@avaya.com
To Next Page
Loading...
