Avaya J129 - Restarting Your Phone through Web Interface

Name Description
Key Displays the list of Phone keys that are available for
the selected tab. The number of keys for the tabs
are as follows:
• Phone keys– 1 to 24 Phone Keys.
• BM 1 (Button module 1)– 25 to 48 Phone Keys.
• BM 2 (Button module 2)– 49 to 72. Phone Keys.
• BM 3 (Button module 3)– 73 to 96 Phone Keys.
Type Contains the types of key configuration.
The values are:
• Feature
• Application
• Line
• Autodial
• Contact
Name Displays values corresponding to the type selected.
Attribute 1 The field is active when the selected Type and
Name of the key requires the Attribute 1 value.
Attribute 2 The field is active when the selected Type and
Name of the key requires the Attribute 2 value.
Label The field is active to enter the key label to display
on the phone screen.
Delete Deletes the value of the corresponding line key.
Related links
Setting Pre-configuration of keys on page 148
Restarting your phone through web interface
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Restart.
3. In the confirmation window Phone will restart if the phone is in idle
state. Do you want to continue?, click OK.
Related links
Configuring the phone using the web interface on page 92
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 150
Comments on this document? infodev@avaya.com