Feature name Description Reference
Active call shortcut keys To use Busy Lamp Fields,
Autodial, or Contacts keys as
shortcuts to perform a specific
action during an active call.
Active call shortcut keys on
page 183
No Hold Conference To set up a conference call without
putting the existing call on hold.
No Hold Conference on page 184
Calling Party Number Blocking To prevent the phone extension
from displaying to other users
during calls.
Calling party number blocking on
page 185
Calling Party Number Unblocking To display the user’s phone
extension during calls.
Calling party number
unblocking on page 185
WML browser To view pre-configured WML
pages from the phone menu.
WML browser on page 185
Application configuration
Contacts list
With the enabled Contacts list feature, the end user can view, add and edit the list of numbers,
and make calls by selecting a contact name or a number. The user can also create a local
Contacts group with the numbers added to the Contacts list, add and remove contacts from the
Groups list.
Related links
Feature and application configuration on page 155
Configuring Groups list by using the web interface on page 157
Contacts list configuration on page 158
Configuring Groups list by using the web interface
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Settings.
3. In the Group Number field, specify the group numbers if available. The value must be
between 0 and 99.
Related links
Contacts list on page 157
Application configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 157
Comments on this document? infodev@avaya.com
To Next Page
Loading...
