Avaya J129 - Group Membership; Group Status

Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Settings.
3. Click Feature access.
4. In the Presence field, click one of the following option:
• Allow: To enable the presence options.
• Do not allow: To disable the presence options.
Presence configuration
You must activate this feature on Avaya Aura
®
Communication Manager.
Use the 46xxsettings.txt file to set the following parameters:
Parameter name Default Value Description
ENABLE_PRESENCE 1 Specifies whether presence is
supported.
The options are:
• 0: Disabled
• 1: Enabled
Note:
This parameter is set to 0 in
an IP Officeand in third-party
call control environment.
ALLOW_DND_SAC_LINK_CHAN
GE
0 Specifies whether to enable DND
and SAC link button on the menu.
The options are:
• 0: To disable DND and SAC link
button.
• 1: To enable DND and SAC link
button.
Note:
Only Avaya J169/J179 IP
Phone supports this feature.
Table continues…
Feature configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 163
Comments on this document? infodev@avaya.com