Avaya J129 - Checking the Time Server Status; Setting the Date

Parameter name Default value Description
DSCPAUD_FL 43 Specifies the DSCP value for
flash precedence or priority level
voice call.
Valid values are from 0 to 63.
DSCPAUD_FO 41 Specifies the DSCP value for
flash Override precedence or
priority level voice call.
Valid values are from 0 to 63.
DSCPAUD_IM 45 Specifies the DSCP value for
immediate precedence or priority
level voice call.
Valid values are from 0 to 63.
DSCPAUD_PR 47 Specifies the DSCP value for
priority precedence or priority
level voice call.
Valid values are from 0 to 63.
ENABLE_PRECEDENCE_SOFT
KEY
1 Specifies that whether the
precedence soft key is enabled or
not on the idle line appearances
on Phone Screen.
Value Operation:
• 0: Disabled.
• 1: Enabled.
ENABLE_MLPP 0 Specifies that whether the
Multiple Level Precedence and
Preemption (MLPP) is enabled or
not.
Value Operation:
• 0: Disabled.
• 1: Enabled.
MLPP_MAX_PREC_LEVEL 1 Specifies the maximum allowed
precedence level for the user.
Value Operation:
• 1: Routine
• 2: Priority
• 3: Immediate
• 4: Flash
• 5: Flash Override
Table continues…
Feature and application configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 170
Comments on this document? infodev@avaya.com