Parameter name Default value Description
SOFTKEY_CONFIGURATION 0,1,2 Specifies which feature will show
up on which softkey on the Avaya
J100 Series IP Phones screens.
The features are defined as
follows:
• 0 = Redial
• 1 = Contacts
• 2 = Emergency
• 3 = Recents
• 4 = Voicemail
Note:
Emergency calls are not
supported in an Open SIP
environment.
Note:
Related links
Voicemail on page 178
Malicious call tracing
With the Malicious Call Tracing feature, the end user can track a malicious or threatening call.
Activating Malicious Call Tracing (MCT Act) alerts a controller to begin call tracing and provide
information for reporting this call. The administrator must set up the phone system to trace and
track malicious calls and there should be an attendant or controlling user to oversee the trace.
This feature must be activated on the Avaya Aura
®
Communication Manager.
Related links
Feature and application configuration on page 155
Pre-configuration of keys
With the Pre-configuration of keys feature, you can configure a set of phone keys for accessing
features, applications or line appearances. You can also set autodialing with this feature.
This set of keys is pre-determined and becomes available after the software installation on the
Phone screen.
Pre-configuration of keys is configured per user, and it is applied to all the phones used by that
user.
Feature and application configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 180
Comments on this document? infodev@avaya.com
To Next Page
Loading...
