Parameter name Default value Description
SHORTCUT_ACTION_AUTODIAL
• 1: the active call is put on hold, and the
user can transfer this call immediately
(blind transfer) or after talking to the
destination first (attended transfer).
If ENABLE_BLIND_TRANSFER is set to
1, the user can select between these
transfer types. If
ENABLE_BLIND_TRANSFER is set to
0, the user can make only an attended
transfer.
• 2: the active call is immediately
transferred to the destination. If this
value is used, it overrides the
ENABLE_BLIND_TRANSFER
parameter value.
• 3: the active call is put on hold, and the
call is established with the destination to
set up a conference.
Related links
Active call shortcut keys on page 183
No Hold Conference
The No Hold Conference (NHC) feature allows a user to set up a conference call without
interrupting the current conversation.
For example, if you press the administered No Hold Conf feature button and then dial an
extension the participant that answers the call joins the no hold conference.
If an extension number is pre-configured on SMGR, and you press the No Hold Conf feature
button the call is placed to the pre-configured number when the participant answers the call joins
the no hold conference.
Using the No Hold Conf feature button you can add more participants to the no hold conference.
If the participants do not answer the call within a prescribed time limit, Avaya J100 Series IP
Phones will display an error on the phone screen.
You can activate this feature on Avaya Aura
®
Communication Manager.
Note:
You can pre-configure only one extension number on SMGR for no hold conference.
Related links
Feature and application configuration on page 155
Feature and application configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 184
Comments on this document? infodev@avaya.com
To Next Page
Loading...
