Avaya J129 - Backup Failed; Restore Process; User Profile Backup on Personal Profile Manager (PPM); User Profile Parameters for Backup

• Sends the backup file to the server.
If the automatic backup process fails, the phone displays the following message:
Backup Failed
Note:
The default value of the credentials and realm are set to null in the following cases:
• At the time of manufacturing.
• When the phone is reset to factory default.
• When user-specific data is removed from the phone.
• Backup process is only initiated when there is a successful retrieval of the user-specific
data.
Restore process
• HTTP server requests the file.
• The phone sends the backup file.
• HTTP server returns the file to the phone.
If the automatic restore process fails, the phone displays the following message:
Retrieval Failed
User profile backup on Personal Profile Manager (PPM)
Phone supports data backup by saving all non-volatile user parameters on PPM . When the user
logs in to any registered device, PPM restores all user data on the device.
Note:
PPM is only available in an Avaya Aura
®
environment.
User profile parameters for backup
The following table lists the parameters that are backed up on Personal Profile Manager (PPM).
Parameter
Default
value
Description
CLICKS 1 Specifies if the phone button can generate click sounds.
OUTSIDE_CALL_RING_TYP
E
1 Specifies the default outside call ring type.
Table continues…
Backup and restore
July 2019 Installing and Administering Avaya J100 Series IP Phones 214
Comments on this document? infodev@avaya.com