2. Place the expansion module bracket on one level to the right of the phone bracket, drill
holes, and then affix the #8 screws.
3. Attach the Avaya J100 Expansion Module to the wall mount bracket by inserting the upper
tab of the wall mount bracket into the slot on the back of the expansion module.
4. Attach the phone to the wall mount bracket. See Wall mounting the phone on page 23 for
more details.
Related links
Wall mounting the phone on page 23
Initial setup and connectivity
July 2019 Installing and Administering Avaya J100 Series IP Phones 26
Comments on this document? infodev@avaya.com
To Next Page
Loading...
