Avaya J129 - Page 318

Parameter name Default
value
Description
WEB_HTTPS_PORT 443 Specifies the port on which the
Web Server running on the phone
will be accessed using HTTPS.
Valid values are 443, 1024 to
65535.
WEBSERVER_ON_HTTP 0 Specifies whether HTTP access to
the web server is enabled or
disabled.
Value operation:
• 0: Web Server is not accessible
through HTTP.
• 1: Web Server is accessible
through HTTP.
WLAN_MAX_AUTH_FAIL_RETRIES 3 Specifies the number of times the
phone will retry a secure
connection upon receiving (possibly
successive) auth failures.
The valid values range from 0 to 4.
WMLEXCEPT Null Specifies zero or more IP
addresses or domains for which the
HTTP proxy server specified by
WMLPROXY will not be used.
The values are separated by
commas without any intervening
spaces.
The value can contain up to 255
characters.
WMLHOME Null Specifies the URL of a WML page
to be displayed by default in the
WML browser and if the Home
softkey is selected in the browser.
The allowed value contains not
more than one URL of up to 255
characters.
Note:
If the value is set to default, the
WML browser is disabled.
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 318
Comments on this document? infodev@avaya.com