Avaya J129 - Page 319

Parameter name Default
value
Description
WMLIDLETIME 10 Specifies the idle time in minutes
after which the web page set as the
value of WMLIDLEURI will be
displayed.
The allowed value is a positive
integer from 1 to 999.
Note:
If WMLIDLEURI is set to null,
the web page will not be
displayed when the phone is
idle.
WMLIDLEURI Null Specifies the URL for a WML page
to be displayed when the telephone
has been idle for the time interval in
minutes specified by the
WMLIDLETIME parameter.
The allowed value contains not
more than one URL of up to 255
characters.
WMLPORT 8080 Specifies the TCP port number of
the HTTP proxy server set as the
WMLPROXY value.
Allowed values are from 0 to
65535.
WMLPROXY Null Specifies the IP addresses or
domains for which the HTTP proxy
server set as the WMLPROXY
value will not be used.
Allowed values can contain up to
255 characters and must be
separated by commas without any
intervening spaces.
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 319
Comments on this document? infodev@avaya.com