Avaya J129 - Diagram: IP Phone Setup; Installation Checklist Without des

Diagram: IP phone setup
IP PHONE
IP PHONE
D H C P
Provides IP address
& sets configurable
parameters for
provisioning
46xxsettings.txt
Sets the system
parameters for
configuration
Configures user, communication,
and session profile
Manages power
and provides
configurable
parameters
for provisioning
Provides Software
distribution package
and Settings file
F i l e
S e r v e r
Network server /
Switch (LLDP)
Manages power
& provides configurable
parameters for
provisioning
D N S
Provides domain name
server address
R o u t e r
Avaya Aura
System Manager
Avaya Aura
Session Manager
Avaya Aura
Communication Manager
Primary setup
®
Avaya Aura
Branch Session Manager
Avaya IP Office
Branch Mode
Survivable setup
Installation checklist without DES
Use this checklist to gather, record, and verify the information during the installation.
No.
Task Reference
1 Check the
prerequisites.
See Hardware and software prerequisites on
page 29 for more information.
2 Configure system
manager user profile.
See Avaya Aura System Manager user profile
worksheet on page 33 for more information.
3 Configure the servers. See Server configuration on page 40 for more
information.
5 Configure LLDP. See Configuration through LLDP on page 43
for more information.
6 Configure VLAN. See Virtual LAN (VLAN) on page 54 for more
information.
7 Install the phone. See Installing the phone on page 35 for more
information.
Initial setup and connectivity
July 2019 Installing and Administering Avaya J100 Series IP Phones 32
Comments on this document? infodev@avaya.com