Avaya J129 - Page 321

Parameter Name Default Value Description
WEP_DEFAULT_KEY N/A Specifies the index of WEP
default key.
Value operation:
•
1
•
2
•
3
•
4
WLAN_COUNTRY
US
Specifies the ISO country code
representing the Wi-Fi regulatory
domain.
WLAN_ENABLE_80211D
0
Enables the phone to configure
its Wi-Fi regulatory domain to
match the 802.11d.
Value operation:
• 0: Disable
• 1: Enable
WEP_KEY_LEN
128 bit
Specifies the length of the WEP
key.
Value operation:
•
40 bit
•
64 bit
•
128 bit
WLAN_PASSWORD N/A Specifies the pre-configured Wi-Fi
network password. This
parameter is applicable if the
WIFISTAT is enabled and
WLAN_SECURITY is wpa2psk,
or WLAN_SECURITY is wpa2e,
WLAN_WPA2E_EAP_METHOD
is PEAP and
WLAN_WPA2E_EAP_PHASE2 is
MSCHAPV2.
The password must be from 8 to
63 characters. Note that the
space and ASCII 0x20 are not
supported.
Table continues…
List of Wi-Fi configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 321
Comments on this document? infodev@avaya.com