No. Task Reference
2 Are you able to make a call from the
phone?
For more information, see
device specific using
guide.
3 Are you able to modify the phone's
Settings file parameters and end user
settings.
List of configuration
parameters on page 223
4 Are you able to upgrade your phone? Device upgrade
process on page 37
5 For security considerations, have you
configured the phone setup with TLS
signaling? Have you installed the
appropriate private network
authentication certificates?
Certificate
management on page 190
6 It is critical that you verify Emergency
calling is working properly in your
network. It may be necessary to make
arrangements with the appropriate
authorities to test this functionality.
For more information, see
Administering emergency
numbers
Note:
For more information about IP Office specific installation, see the following IP Office
documents:
• Avaya IP Office
™
Platform Solution Description
• Avaya IP Office
™
Platform Feature Description
Device upgrade process
Avaya J100 Series IP Phones are upgraded to a newer version using the APPNAME parameter.
Alternatively, you can use the APPNAME_IN _USE parameter which checks the firmware version
installed on the phone to perform a corresponding upgrade action, for example:
IF $APPNAME_IN_USE SEQ 4.0.2.0.11 GOTO CROSSGRADE
The device process using the APPNAME parameter is described below:
1. During boot-up, the phone receives the file server address from DHCP, LLDP, or the device
interface.
2. The phone contacts the provisioning server to download the firmware upgrade file,
J100Supgrade.txt.
3. In J100Supgrade.txt, the APPNAME parameter contains the firmware version.
4. The phone compares the currently installed software version with the version specified in
the APPNAME parameter.
Device upgrade process
July 2019 Installing and Administering Avaya J100 Series IP Phones 37
Comments on this document? infodev@avaya.com
To Next Page
Loading...
