Example
The following shows an example of setting the vendor-specific option 17 in the dhcp6.conf file:
## SSON on Avaya phone default is 242
## Specific the HTTP server used by the Avaya phones
## Allocate 2 bytes for option code, 2 bytes for option data length, 3 hash buckets
option space Avaya code width 2 length width 2 hash size 3;
option Avaya.avaya-option-242 code 242 = text;
## 6889 is enterprise number for Avaya
option vsio.Avaya code 6889 = encapsulate Avaya;
## option data (sample):
option Avaya.avaya-option-242 "HTTPSRVR=2000::114f:
85f7:f238:9eb5,MCIPADD=2000::54,SIG=SIP";
Next steps
In the dual environment, it is recommended to set DUAL_IPPREF to 6 to override the default
value of 4 in the 46xxsettings.txt file.
This parameter is used only in dual mode to apply Site Specific Option Number (SSON)
parameters either from a DHCPv4 or a DHCPv6 server.
IPv6 limitations
After upgrading Avaya J100 Series IP Phones to the current release firmware version, if IPv6 was
not enabled previously, the phone will function in dual mode to get valid IPv6 address from the
network. This may cause an additional reboot of the phone.
Microsoft Exchange Server integration
To integrate with Microsoft
®
Exchange Server, you need to configure the parameters in the
46xxsettings.txt file and set the required values in the Settings menu on the phone.
For more information about configuring the parameters via the phone menu, see the “Configuring
Microsoft
®
Exchange Server calendar” section in the using guide of the required phone model.
Configuring the settings file parameters
Set the following parameters in the 46xxsettings.txt file to specify your company email
domain, your company email user domain, and add trust certificates if required:
Microsoft Exchange Server integration
July 2019 Installing and Administering Avaya J100 Series IP Phones 67
Comments on this document? infodev@avaya.com
To Next Page
Loading...
