Configuration Parameter Name Description
HTTP server Specifies the IP address of the HTTP file server.
The available format is nnn.nnn.nnn.nnn.
HTTPS server Specifies the IP address of the HTTPS file server.
The available format is nnn.nnn.nnn.nnn.
DNS server Specifies the IP address of the DNS server. The
available format is nnn.nnn.nnn.nnn.
SNTP server Specifies the time server settings.
The following parameters are available in Auto provisioning menu:
Service Specifies option for auto provisioning. Press Toggle
to choose the required option :
• Inactive
• Active
Certificate Specifies if the certificate is available.
Certificate Expiry Specifies the expiry date of the certificate. The
available format is DD-MMM-YYYY
Using the debug mode
About this task
Use this procedure to activate or deactivate the debugging options.
Before you begin
You must set a HTTP server in the BRURI parameter in the Settings file that is capable of
receiving a phone report from the phone. BRURI parameters can receive only phone report. It has
no effect on any other debugging setting.
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Debug.
The phone displays the following debug options:
• Serial port mode
• Port mirroring
• Phone report
• SSH access
• SSH fingerprint
• Clear SSH lockout
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 79
Comments on this document? infodev@avaya.com
To Next Page
Loading...
