Avaya J129 - Group Identifier; Setting Event Logging; Setting the Group Identifier

Related links
Configuring the phone using Administration menu on page 74
Group identifier
A group identifier is a number assigned to a particular community of IP phone users in an
organization. The group identifier number can be a number from 0 to 999 and the default number
is 0.
With a group identifier, you can provide administration settings to each phone used by different
communities of end users. For example, you might want to group users by time zones or work
activities.
You can configure group identifier from the phone UI as a local administration process.
Related links
Configuring the phone using Administration menu on page 74
Setting the group identifier on page 81
Setting the group identifier
About this task
Use this procedure to set or change the group identifier only if the LAN Administrator instructs you
to do so.
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Group.
5. Enter any Group value between 0 to 999.
When you change the Group value, the phone restarts after you exit the admin menu.
6. Press Save.
Related links
Group identifier on page 81
Setting event logging
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Log.
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 81
Comments on this document? infodev@avaya.com