5. Use the Right and Left Arrow keys to select one of the following settings associated with
the corresponding SYSLOG_LEVEL:
• Emergencies: SYSLOG_LEVEL=0
• Alerts: SYSLOG_LEVEL=1
• Critical: SYSLOG_LEVEL=2
• Errors: SYSLOG_LEVEL=3
• Warnings: SYSLOG_LEVEL=4
• Notices: SYSLOG_LEVEL=5
• Information: SYSLOG_LEVEL=6
• Debug: SYSLOG_LEVEL=7
6. Press Save.
Related links
Configuring the phone using Administration menu on page 74
Administering enhanced local dialing
Phones automatically prepend a number from the incoming call log or from web pages with a digit
to dial an outside number. This feature is called enhanced local dialing (ELD). For example, if you
get a call from an international number and want to call back, the phone determines the number to
be called and prepends the number to get an outside line. The phone then dials the number.
The following configuration parameters are applicable to this feature:
Parameter name Default value Description
ELD_SYSNUM 1 Specifies whether enhanced local dialing
algorithm will be applied for system numbers.
Value operation:
• 0: Disable enhanced local dialing for system
numbers.
• 1: Enable enhanced local dialing for system
numbers.
ENHDIALSTAT 1 Specifies if the algorithm defined by the
parameter is used during certain dialing
behaviors.
Value operation:
• 0: Disables algorithm.
• 1: Enables algorithm, but not for contacts.
• 2: Enables algorithm, including contacts.
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 82
Comments on this document? infodev@avaya.com
To Next Page
Loading...
