3. Press Enter.
4. Select SIP.
5. Choose one of the following:
• SIP global settings
• SIP proxy server
6. Press Select or OK to change any of the following SIP global settings:
• Domain: Changes the domain parameter of SIP.
• Avaya Environment: Specifies whether the available SIP Avaya environment is in
effect.
The two modes to detect the available environment are as follows:
- Auto: Detects the Avaya environment automatically.
- No: Does not detect the Avaya environment and switches to a non-AST mode.
• Reg. policy: Specifies the registration policy for SIP.
The two modes are as follows:
- Alternate: Supports registration to one of the active controllers.
- Simultaneous: Supports registration to both the active controllers.
• Failback policy: Specifies the fall back policy.
The two modes are as follows:
- Auto: Active controller automatically recovers after failback.
- Admin: Active controller uses failback policy defined by the administrator.
• Proxy policy: Specifies whether the settings of SIP proxy servers are read-only or can
be edited by the user.
The two modes are as follows:
- Auto: The user can only view the settings.
- Manual: The user can edit, delete, or create new server properties.
7. Select SIP proxy server to change SIP proxy server settings.
Caution:
Do not configure proxy settings manually while a user is logged in to the phone.
The phone displays the IP address of the server that you selected.
8. Press Details and use the Up and Down Arrow keys to view, add, or change the following
settings:
• Proxy: Specifies the IP address or DNS for Avaya Aura
®
Session Manager
deployments. The corresponding parameter is SIP_CONTROLLER_LIST.
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 86
Comments on this document? infodev@avaya.com
To Next Page
Loading...
