4. Select View.
5. Press Back to return to the main menu.
VIEW field description
Setting Description Associated Configuration
Parameter
Model The model of the phone that is
set by factory procedures.
MODEL
Backup SW version The version of the software
backup.
Gateway The address of the gateway.
Group The group identifier to download
during start-up a specific
configuration set for a dedicated
user group.
GROUP
MAC The MAC address of the phone. MACADDR
Serial number The serial number of the phone.
SIP Proxy Server The SIP proxy server to which the
phone registered successfully.
SIPPROXYSRVR_IN_ USE
Presence Server
The setting is only available in an
Avaya Aura
®
environment.
The IP address of the presence
server.
HTTPS Server The list of IP or DNS addresses
of TLS servers for HTTPS file
download, settings file or
language files, during startup
procedure.
TLSSRVR
HTTP Server The IP address of the HTTP
server that the phone accessed
before successfully.
HTTPSRVR_IN_USE
DNS Server The IP address of the DNS server
that the phone accessed before
successfully.
DNSSRVR_IN_USE
SW version The version of the software.
Protocol Signaling protocol in effect, such
as SIP.
Setting the 802.1x operational mode
Before you begin
Set the following parameters:
• DOT1X: To support 802.1X Pass-thru operation, set the parameter to zero or one.
• DOT1XSTAT: To support supplicant operation, set the parameter to one or two.
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 88
Comments on this document? infodev@avaya.com
To Next Page
Loading...
