The parameters which require immediate reboot to be configured are marked with double
asterisk (**).
Related links
Phone configuration on page 74
Enabling access to web interface of the phone on page 93
Configuring network settings on page 95
Configuring Ethernet settings on page 98
Configuring Wi-Fi settings on page 103
Configuring SIP settings on page 109
Configuring Settings on page 118
Configuring date and time on page 131
Configuring management settings on page 133
Changing the password of the web interface and the phone admin on page 136
Debugging on page 137
Configuring certificates on page 141
Configuring Environment Settings on page 145
Configuring Background and Screen Saver of the Phone on page 146
Configuring Calendar of the phone on page 147
Setting Pre-configuration of keys on page 148
Restarting your phone through web interface on page 150
Resetting the phone to Default on page 151
Enabling access to web interface of the phone
Administrators can enable access to the web interface of the phone through one of the following
methods:
• By using the phone Administration menu.
• By setting the required parameter in the 46xxsettings.txt file.
Related links
Configuring the phone using the web interface on page 92
Enabling access to the web interface through the Phone Administration menu on page 93
Enabling web interface access through the settings file on page 94
Viewing IP address of the phone on page 94
Enabling access to the web interface through the Phone Administration menu
Procedure
1. On the phone, press Main Menu.
2. Scroll to Administration, and press Select.
3. In the Access code field, enter the administration password.
The default access code is 27238.
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 93
Comments on this document? infodev@avaya.com
To Next Page
Loading...
