Name Description
HTTPS Listen Port Specifies the port number of the web server when
the web interface is accessed using HTTPS.
The valid value range is from 443 to 65535. The
default port number is 443.
The valid value is an integer from 443 to 65535.
Use certificate for Web Server Specifies which server certificate will be used when
the web interface is accessed using HTTPS.
The options are:
• Factory Certificate (default)
• Custom Certificate
Related links
Configuring network settings on page 95
Configuring Ethernet settings
About this task
Avaya J100 Series IP Phones display the details of the configuration fields in the Description
section of the screen.
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Ethernet.
3. Configure the following areas:
• IP Configuration
• IPv4 Configuration
• IPv6 Configuration
• 802.1X Supplicant Operating Mode
• VLAN
• QoS
• LLDP
• Ethernet Interface
4. Click one of the following:
• Save: To save the configuration changes.
• Reset to Default: To revert to the default values.
Related links
Configuring the phone using the web interface on page 92
Ethernet settings field descriptions on page 99
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 98
Comments on this document? infodev@avaya.com
To Next Page
Loading...
