Chapter 4: Handling outgoing calls
Making a call by using the dial mode
About this task
Use this procedure to make a call without lifting the handset or pressing Speaker.
Before you begin
Set the dial mode on the phone toAuto or Manual.
Procedure
• If the dial mode is set to Auto, dial the required number of digits.
The phone initiates the call when the inter digit timer times out.
• If the dial mode is set to Manual, dial the number and press the Call softkey.
Related links
Setting the Dial mode on page 43
Making a call without using the dial mode
Procedure
1. Lift the handset or press Speaker.
2. Press the digits on the dial pad.
The phone initiates the call when the inter digit timer times out.
Redialing a number
About this task
Use this procedure to redial a number. If you delete the outgoing call log, the last dialed number is
deleted.
March 2017 Using Avaya J129 IP Phone 19
Comments on this document? infodev@avaya.com
To Next Page
Loading...
