Avaya J129 - Adjusting the Call Volume

Chapter 9: Using call related features
Muting and unmuting a call
Procedure
1. To mute an active call, press Mute.
2. To unmute the call, press Mute again.
Note:
The Mute button is illuminated when you press mute.
Activating Mute Alert
About this task
Use this procedure to configure your phone to alert if you speak while your phone is on mute.
Before you begin
Ensure that the system administrator activates the option for your extension.
Procedure
1. Press Main Menu > Settings > Phone Settings.
2. Use the Down Arrow key to go to the Mute Alert screen.
3. Press Change to select one of the following:
• Audible: If you put a call on mute and start speaking after eight seconds, the phone
produces a beep to notify that you are on mute.
• Visual: If you put a call on mute and start speaking after eight seconds, the phone
displays the Call Muted icon.
Note:
If the user stops talking while mute alerting is on, after a delay of 500 milliseconds, the
call muted icon is replaced by the normal active call icon
• Both: Combines the actions of both audible and visual alerting.
• None: Disables the mute alert for your phone.
March 2017 Using Avaya J129 IP Phone 35
Comments on this document? infodev@avaya.com