4. Press Save.
Mute alert turns off automatically when you take the call off mute.
Visual alerting
The beacon LED works in the following manner to indicate incoming calls and messages:
• If there is an incoming call, the beacon LED blinks.
• If there are new voice mail messages, the beacon LED is lit continuously.
• If the speaker is on during an active call and there are new voice mail messages, the beacon
LED turns off every 15 seconds.
• If the speaker is on during an active call and there are no voice mail messages, the beacon
LED turns on every 15 seconds.
Note:
•
When the call is on speaker, the speaker icon ( ) replaces the active call handset ( )
icon.
• If the call is on hold, the beacon LED stops flashing.
Related links
Setting Visual alerting on page 44
Placing a call on hold and resuming the call
Procedure
1. To put an active call on hold, press Hold.
2. To resume the call, press Resume or OK.
Activating transfer to voice mail
About this task
Use this procedure to transfer an active call to voice mail.
Before you begin
Your system administrator must activate the feature for your extension.
This feature is only available in the Avaya Aura
®
environment.
Using call related features
March 2017 Using Avaya J129 IP Phone 36
Comments on this document? infodev@avaya.com
To Next Page
Loading...
